ACOUSTICS
TYPE: Dual-driver, direct radiating powered subwoofer
FREQUENCY
RESPONSE (3): 35Hz – 150Hz ±3dB, -10dB @ 30Hz
DRIVER: 2x 18 inch (460mm)/4 inch (100mm) voice coil, long excursion, ferrite magnet,
waterproof cone
INPUT SENSITIVITY: -30dBu for 100dB SPL
MAXIMUM SPL (4): 140dB continuous / 143dB peak
DISPERSION: Omnidirectional / or Cardioid (paired)
CROSSOVER Active Presets for CDD Live 8, 12 & 15 mono-pole or cardioid (paired)
MODULE
AUDIO INPUT
CONNECTORS: Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon
ANALOGUE INPUT IMPEDANCE: 20 kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL: 24.6 Vpp (+21dBu), over voltage protected
INTERNAL PROCESSING: Multi-channel DSP, programmable via TCP/IP using VU-Net software
PEQ/shelving filters
Up to 48dB/Oct LPF
Up to 200mS input delay
Pre-set selection via rear panel switch
NETWORK
CONNECTORS: 2xNeutrik® Ethercon RJ45
PROTOCOL: TCP/IP and UDP/IP
AMPLIFIER MODULE
TYPE: Two 2 channel switch-mode, class D,
Bridged Tied Load
PEAK OUTPUT POWER: 4000W
AVERAGE EFFICIENCY: 89%
COOLING: External fan
MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) for full output
POWER SUPPLY
TYPE: Switch mode, fixed frequency with PFC
AC INPUT OPERATING RANGE: 85 – 265V ~ AC, 50 - 60Hz
POWER FACTOR: > 0.98
NOMINAL POWER CONSUMPTION: 250W
MAINS CONNECTOR: Neutrik® Powercon True1
MECHANICAL
ENCLOSURE: Extensively braced multi-laminate birch plywood.
FINISH: Textured black PU coating.
PROTECTIVE GRILLE: HEX perforated mild steel with protective zinc plating and black powder coat finish
FITTINGS: Two skids on base, with mating channels on top
Four rear-mounted 100mm (4in) castors
24 x M10 mounting points
4x Bar handles, 2 on each side
4x fittings for optional transit cover
Optional weather protection cowl
IP RATING: IP24 factory option available
DIMENSIONS: (W) 1085mm x (H) 537mm x (D) 792mm (920mm including castors)
(W) 42.72in x (H) 21.13in x (D) 31.16in (36.20in including castors)
WEIGHT: 105kg (231lbs) excluding Transit cover
ACCESSORIES: Transit Cover